Changed Capacitor But AC is Still Not Working

Changed Capacitor But AC is Still Not Working?: 4 Quick Solutions!


Machines like Air Conditioners might go out of order for many reasons. And of the prime suspects is a bad capacitor.

But what if you have changed the capacitor but AC is still not working?

Well, if it’s not the capacitor that is causing the trouble in an AC, check all the internal wiring and make sure there is no bypass or short. Next, make sure your fuse is not blown up. Finally, your power source might also be the reason in this case.

Let’s read along to learn more about each of these fixes.

First Thing First: What It’s A Bad Capacitor?

Let’s be real, you are no professional to understand what’s wrong with your AC instantly. So, start off by observing a few facts about your AC to make sure it’s the capacitor that’s causing issues for your AC-

  • If you notice a rise in your energy bills it’s because of a bad capacitor. The bad capacitor uses more energy than the system needs. 
  • Are you hearing a humming noise from your AC? Yes, you got that right, bad capacitor. Your AC will also hesitate to start because of it.
  • It’s an annoyance if your AC keeps turning on and off on its own. But it’s indicating your capacitor is in a bad state.
  • Because of a bad capacitor, you might notice your AC is only working during the daytime but not at night.

If you still have any confusion, use a multimeter. You can test your capacitor with a multimeter to come to a conclusion. 

4 Other Reasons Can Stop An AC From Working?

If none of the symptoms are found in the case of your AC, it’s not the capacitor that needs replacement. Find what other reasons there might be in the next part-

Reason 1 of 4: Bad Internal Functions of The AC

Well, when you installed your old capacitor you might have missed the wiring functions.

To check the wiring inside, you need to turn off the AC. Now you have to pull out the panel of your air conditioner.

Checking All the Internal Functions

Source: goblueox

Now pull out your old capacitor and check all the wirings. You have to put the wirings in the correct terminal. To understand which capacitor wire goes into what terminal, read the capacitor’s manual or the printed guide on the body.

To see the result you need to turn on your AC.

Solution 2 of 4: Faulty Fuse in the AC

Sometimes, a faulty or oversized/undersized fuse can blow up and create an issue for your capacitor. 

If you’re curious about the reason, AC fuse blowing up can be caused if you are putting too much pressure on your AC. And that can be done by two ways-

  • Clogged air filter.
  • Dirty coil.

To avoid the first issue, check your air filter regularly, and keep the inside and air filter of the AC clean.

For dirty motors, use one of these motor cleaners after every 2-3 months of use-

ProductFeaturesBuy Now
Nu-Calgon Evap Foam No Rinse Evaporator Coil CleanerLiquefies dirt, oil and grease very quickly in the systemCheck Latest Price
K&N HVAC Filter CleanerRemoves filter clogging to prevent low pressure lockoutCheck Latest Price
Frost King ACF19 Foam Coil CleanerCleans fiter, coil, and fan bladesCheck Latest Price
Klima-Cleaner Air Conditioner CleanerImproves the cooling efficiency Check Latest Price

Solution 3 of 4: Resolve Any Power Issues 

This is the simplest as well as the most complex issue for your air conditioner. If the power source of your AC is faulty it will not work correctly. 

Power issues can be caused because of overheating or high pressure on your AC. The circuit breaker will flip out if your AC overheats.

Power issues will also burn out the motor of your AC. Your AC unit will make noise because of a power issue.

Replacing it will be expensive so it’s better to fix it yourself. Check the power source and if it’s faulty replace it with a new one. 

Turn off your AC unit and change/replace the power source. Make sure you are turning the AC off when it’s not being used. 

Reason 4 of 4: Replacing the Capacitor

We know it’s annoying as you have already changed it. But you need to understand that the replaced capacitor is also defective. 

The first thing you need to do is turn off the whole AC unit. Now remove the access panel.  

Do you see your old capacitor? Don’t throw it out yet. You need to read the capacitance and voltage ratings. 

You need this information for your newly replaced capacitor. 

Now dismount the old capacitor. You should label the wires so that you can connect the new capacitor to the perfect terminal.

Now it’s time to install the new capacitor. You just need to attach the wire you already labeled. 

Now, turn on the  AC and test it out.  

If your AC is still not working you need to call A1 or any nearby technicians to check the air conditioner out. 

You need to maintain your AC regularly to prevent such situations from occurring.

How to Maintain Your Air Conditioner?

Trust me when I say this, you don’t want your AC to go wrong in the summer. So before the summer heat arrives, keep these tips in mind for your AC to function better

  • Firstly, you need to clean the air filter of your AC on a regular basis.
  • The most important part of your AC is the coils. As time passes the coils insulate dirt and it reduces heat absorption. So clean the coils once in a while. 
  • You should schedule a professional air conditioning service once in a while. Look, we are not professionals so we need to let them check this even if it costs you a few bucks.
  • Don’t forget to clean and find the vents regularly. 
  • Finally, for safety reasons you should not use any products which are not recommended. 

Frequently Asked Questions (FAQs) 

Can I run my AC without a capacitor?

No you can’t run AC without a capacitor. Because the motors of your air conditioner need a good capacitor to run. Your AC will not be able to give you cold air if there is no capacitor. Without a capacitor, the fan of your AC will also not run.  

What can I do when my AC is not blowing cold air?

Your air conditioner sometimes does not blow cold air because of the condition of your air filter. Your air filter needs to be thoroughly cleaned on a regular basis. You also should check if there is an ice buildup. After cleaning or removing the ice buildup just turn on the fan of your AC. 

How can I rest my AC unit?

To reset your AC unit, you need to turn off the whole unit first. Then all you need to do is shut down the circuit breaker and wait for a few minutes. After waiting, turn your AC back on. Keep in mind that all the data will be erased. So, set the temperature and mode again.


Well, now you don’t need to worry about a changed capacitor but AC is still not working anymore. Because by now you already learned how to fix it yourself!

One last tip. Before buying a new capacitor make sure you are buying an authentic product.

Have a good summer!

Leave a Comment

Your email address will not be published.

Scroll to Top